Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of California

Commercial Pressure Washing for Stucco in California

Soft wash for stucco. Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours. Typical cost $400-$2,000.

From the free quote to the final rinse, commercial pressure washing for stucco in California follows a simple process: inspect, protect, clean, rinse and check. With stucco, the right approach is soft wash.

Method and pressure

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

Cleaning stucco safely

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

Signs you need commercial pressure washing for stucco

  • Dirty entrances and walkways
  • Stained building walls and signs
  • Gum, grease and spills around doors
  • Customer or tenant complaints
  • Health or property manager inspections coming up

What causes the dirt and stains

  • Heavy foot traffic
  • Vehicle traffic and drips
  • Food and grease near restaurants
  • Pollution and weather

Easy upkeep between cleanings

  • Sweep entrances daily
  • Clean up spills right away
  • Keep dumpster areas closed and clean

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Wash water reaching storm drains, which can violate local stormwater rules
  • Slips and liability during business hours
  • Damaging signs, windows and finishes

Our process for commercial pressure washing for stucco

  1. Survey the property and plan around your hours
  2. Set up signs and control wash water
  3. Pre-treat stains, gum and grease
  4. Clean walls and flatwork with the right pressure
  5. Final walkthrough and maintenance schedule

Commercial Pressure Washing for Stucco cost in California

$400-$2,000Typical range for a typical small to mid-size commercial building
Half a day to several daysTypical time on site
Quarterly to yearly, depending on trafficRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Serving California and nearby towns

Commercial properties in California need sidewalks, entrances and dumpster areas cleaned regularly, with wash water kept out of storm drains to meet local stormwater rules.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We cover 841 cities and towns across California. Find commercial pressure washing for stucco in your city:

Commercial Pressure Washing for Stucco: frequently asked questions

How much does commercial pressure washing for stucco cost in California?

Commercial Pressure Washing for Stucco typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for commercial pressure washing for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is commercial pressure washing for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule commercial pressure washing for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in California

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

Oil Stain Removal for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$300

House Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$700

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Soft Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$800

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Efflorescence Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$600

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Ready for a cleaner home or business?

Get a free pressure washing quote in California. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote