Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of California

House Washing for Aluminum Siding in California

Soft wash for aluminum siding. A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae. Typical cost $300-$700.

When we handle house washing for aluminum siding in California, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On aluminum siding, the method we use is soft wash.

Method and pressure

Soft washCleaning method
Soft wash, typically under 500 PSIPressure

Cleaning solution: A gentle detergent solution; strong cleaners can dull the finish further.

Caring for aluminum siding

Older aluminum siding often has a chalky, oxidized finish. Washing removes dirt and mildew but also removes loose chalk, which can make faded panels look patchy. If the finish is badly oxidized, washing is usually the prep step before repainting.

Avoid: High pressure, which dents thin panels and strips chalky paint unevenly.

How often: Every 1-2 years.

Is it time for house washing for aluminum siding?

  • Green or black film on the shaded sides of the house
  • Dirt splash along the bottom of the walls
  • Cobwebs and wasp nests under the eaves
  • Chalky or dull-looking siding
  • You're planning to paint, sell or list a rental

What causes the dirt and stains

  • Mildew and algae in shade and humidity
  • Rain splashing soil onto the bottom courses
  • Pollen, dust and road grime
  • Spiders and insects under the soffits

What you can do yourself

  • Rinse small areas with a garden hose and a soft brush on an extension pole
  • Use a mild detergent made for siding, not household bleach straight from the bottle
  • Clear plants and furniture away from walls before a wash
  • Look for loose siding, open seams or damaged caulk before anyone washes the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Water driven under siding laps and into wall cavities
  • Broken window seals and water inside the house
  • Stripped paint, raised wood grain or etched stucco from high pressure
  • Ladder falls while spraying

What happens on the day

  1. Walk the house and point out problem areas or damage
  2. Cover outlets, lights and fixtures, and pre-wet landscaping
  3. Apply a soft wash solution from the bottom up
  4. Rinse from the top down at low pressure, including eaves and soffits
  5. Rinse plants, check windows and walk the house with you

How much does house washing for aluminum siding cost?

$300-$700Typical range for a typical 1,500-2,500 sq ft home
2-4 hoursTypical time on site
Every 1-2 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for aluminum siding

Local house washing for aluminum siding for California

In California, stucco and siding mostly collect dust, cobwebs and sprinkler spots, while shaded walls can grow mildew after winter rains. A soft wash handles both without etching stucco.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Much of California has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We cover 841 cities and towns across California. Find house washing for aluminum siding in your city:

House Washing for Aluminum Siding: frequently asked questions

How much does house washing for aluminum siding cost in California?

House Washing for Aluminum Siding typically costs $300-$700 for a typical 1,500-2,500 sq ft home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for house washing for aluminum siding?

For aluminum siding: soft wash, typically under 500 PSI. What we avoid: high pressure, which dents thin panels and strips chalky paint unevenly. The cleaning solution does most of the work, followed by a gentle rinse.

Is house washing for aluminum siding safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule house washing for aluminum siding?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in California

Pool Deck Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $200-$500

Oil Stain Removal for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$300

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Soft Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$800

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Efflorescence Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$600

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Deck Cleaning for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in California. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote